|
|
EXTECH 461880: Vibration Meter + Laser/Contact Tachometer
Measures Acceleration, Velocity and Displacement plus RPM and Linear Surface Speed
Features:
- Remote vibration sensor with magnetic adapter on 39"(1m) cable
- Wide frequency range of 10Hz to 1kHz
- RMS or Peak Value measurement modes
- Manual/Auto store/recall up to 1000 readings
- Data Hold and Auto shut-off
- Contact and Non-Contact (Laser) tachometer functions
- Uses a laser for greater distance non-contact measurements up to 4.9ft (1.5m)
- Large LCD with characters on display reverse direction depending on contact, photo, or vibration mode
- Windows® 95/98/NT/2000/XP compatible software (included) allows captured readings to be downloaded to your PC for further analysis
|
|
EXTECH AN200: CFM/CMM Mini Thermo-Anemometer with built-in InfaRed Thermometer
Large display of Airflow or Air Velocity with built-in InfraRed Thermometer
Features:
- CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with 8:1 distance to spot ratio and Laser Pointer
- Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
- Easy to set Area dimensions (cm2) are stored in the meter’s internal memory for the next power on
- Resolution of 0.01m/sec
- 20 point average for Air Flow
- Super large (9999 count) LCD Backlit Display
- 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
- Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster
|
|
EXTECH EX470: 12 Function True RMS Professional MultiMeter + InfraRed Thermometer
True RMS, autoranging DMM with large digit LCD display and Type-K/IR temperature function
Features:
- True RMS DMM with 12 functions and 0.3% basic accuracy
- AC/DC Voltage & Current, Resistance, Capacitance, Frequency, TypeK & IR Temperature, Diode/Continuity, Duty Cycle
- Built-in non-contact InfraRed Thermometer with 8:1 distance to target ratio with 0.95 fixed emissivity
- Input fuse protection and mis-connection warning
- 20A max Current
- Type K temperature measurements
- Data hold, Relative, Auto power off
- Large-digit backlit LCD
- Complete with CAT III test leads, tilt stand, protective holster, velcro hanging strap, Type K bead wire temp probe and 9V battery
|
|
EXTECH EX570: 12 Function True RMS Industrial MultiMeter with IR Thermometer
True RMS, autoranging DMM with large digit LCD display and Type-K/IR temperature function
Features:
- Built-in Non-contact InfraRed Thermometer with laser pointer
- True RMS CAT III-1000V, CAT IV-600V rated with 0.06% basic DCV accuracy
- Heavy duty Double molded, water resistant package
- Large backlit 40,000 count LCD with 40-segment bargraph
- Memory for storage and recall of three measurements
- Type K thermocouple contact temperature measurements
- Features include HOLD, RELATIVE and PEAK HOLD
- 1000V input protection on all functions
- Min, Max and Average recording, Auto power off with disable feature
- Capacitance, Frequency, Diode and Continuity functions
- Complete with double molded test leads, magnetic hanging strap, Type K bead wire temperature probe, case, and 9V battery
|
|
EXTECH EX622: 400A Dual Input AC Clamp Meter + NCV + IR Thermometer
AC Clamp-on meter with built-in dual Thermocouple inputs, NCV Detector and InfraRed Thermometer
Features:
- True RMS measurements for accurate AC Voltage and Current measurements
- Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
- Built-in non-contact IR Thermometer with laser pointer for locating hot spots (up to 518°F/270°C)
- Built-in non-contact Voltage detector with LED alert
- DC µA multimeter function for HVAC flame rod Current measurements
- Data Hold plus fast Peak Hold of current surges during motor startup
- 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
- Measures motor capacitors to 40,000µF
- 1.25" (32mm) jaw opening for conductors up to 500MCM
- Rugged double molded housing
- Auto power off with audible alert and disable function
- Autoranging with manual override
- 8 to 1 distance to target ratio
- Complete with CAT III-600V, double molded test leads, 9V battery, two general purpose Type K bead wire probes and case
|
|
EXTECH EX623: 400A Dual Input AC/DC Clamp Meter + NCV + IR Thermometer
AC/DC Clamp-on meter with built-in dual Thermocouple inputs, NCV Detector and InfraRed Thermometer
Features:
- True RMS measurements for accurate AC Voltage and Current measurements
- Dual type K thermocouple input with Differential Temperature function (T1, T2, T1-T2)
- Built-in non-contact IR Thermometer with laser pointer for locating hot spots (up to 518°F/270°C)
- Built-in non-contact Voltage detector with LED alert
- DC µA multimeter function for HVAC flame rod Current measurements
- Data Hold plus fast Peak Hold of current surges during motor startup
- 40,000 count multimeter functions for DC Voltage, Resistance, Capacitance, and Frequency for high resolution over wider ranges
- Measures motor capacitors to 40,000µF
- 1.25" (32mm) jaw opening for conductors up to 500MCM
- Rugged double molded housing
- Auto power off with audible alert and disable function
- Autoranging with manual override
- 8 to 1 distance to target ratio
- Complete with CAT III-600V, double molded test leads, 9V battery, two general purpose Type K bead wire probes and case
|
|
EXTECH EX810: 1000A AC Clamp Meter with IR Thermometer
AC Clamp-on multimeter with built-in non-contact InfraRed Thermometer
Features:
- Non-contact InfraRed Temperature measurements with laser pointer
- Peak hold captures inrush currents and Transients
- MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
- 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
- 4000 count backlit display
- Autoranging with manual range button
- Features include Data Hold and Min/Max, Auto Power off
- Complete with test leads, 9V battery and case
|
|
EXTECH EX820: 1000A True RMS AC Clamp Meter with IR Thermometer
AC Clamp-on multimeter with built-in non-contact InfraRed Thermometer
Features:
- Non-contact InfraRed Temperature measurements with laser pointer
- True RMS Current and Voltage measurements
- Peak hold captures inrush currents and Transients
- MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, Continuity and Type K Thermometer
- 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
- 4000 count backlit display
- Autoranging with manual range button
- Features include Data Hold and Min/Max, Auto Power off
- Complete with test leads, 9V battery, general purpose Type K probe and case
|
|
EXTECH EX830: 1000A True RMS AC/DC Clamp Meter with IR Thermometer
AC/DC Clamp-on multimeter with built-in non-contact InfraRed Thermometer
Features:
- Non-contact InfraRed Temperature measurements with laser pointer
- True RMS Current and Voltage measurements
- Peak hold captures inrush currents and Transients
- MultiMeter functions include AC/DC Voltage and Current, Resistance, Capacitance, Frequency, Diode, Continuity and Type K Thermometer
- 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
- 4000 count backlit display
- Autoranging with manual range button
- Features include Data Hold and Min/Max, DC Zero, Auto Power off
- Complete with test leads, 9V battery, general purpose Type K probe and case
|
|
EXTECH EX840: 1000A AC/DC True RMS Clamp/DMM + IR Thermometer
AC/DC Clamp-On Meter/Digital MultiMeter with built-in Infrared Thermometer
Features:
- Non-contact IR Temperature measurements with laser pointer
- True RMS Current and Voltage measurements
- Peak hold captures inrush currents and Transients
- Multimeter functions: AC/DC Voltage, Resistance, Capacitance, Frequency, Diode, and Continuity
- 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
- 4000 count backlit display
- Data Hold and Min/Max, Auto Power off
- Complete with standard test leads, 9V battery, general purpose Type K probe, belt holster, and professional CAT III-1000V Test Leads
|
|
EXTECH EX845: 1000A AC/DC True RMS Clamp/DMM with IR Thermometer and Bluetooth MeterLink™
AC/DC Clamp Meter/MultiMeter with built-in IR Thermometer and Wireless Capability
Features:
- True RMS Current and Voltage measurements
- MultiMeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Diode, and Continuity
- 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
- 4000 count backlit display
- Peak hold captures inrush currents and Transients
- Built-in non-contact IR Thermometer with laser pointer
- Features include Data Hold and Min/Max and Auto Power off
- Autoranging with manual range button
- MeterLink™ Bluetooth transmitter Wirelessly transmits Voltage and Current readings to selected FLIR thermal imaging IR cameras to incorporate meter readings with thermal images
- Complete with CAT IV test leads, 9V battery, Type K probe, pouch case, and Professional Test Lead Set
- EX845 METERLiNK™ for Android app for remote meter reading\
|
|
EXTECH HD300: CFM/CMM Thermo-Anemometer with built-in InfaRed Thermometer
Built-in IR Thermometer measures non-contact surface temperature
Features:
- InfraRed Thermometer measures remote surface temperatures to 932°F (500°C) with 30:1 distance to spot ratio and Laser pointer
- Simultaneous display of Air Flow in CFM/CMM or Air Velocity plus Ambient Temperature
- Easy to set Area dimensions (cm2) are stored in the meter’s internal memory for the next power on
|
|
EXTECH HD500: Psychrometer with InfraRed Thermometer
Humidity, Type K Thermometer and 30:1 InfraRed Thermometer
Features:
- Built-in InfraRed Thermometer for non-contact temperature measurement to 932°F (500°C)
- IR Thermometer: 30:1 distance to target ratio
- Type K Thermometer for contact temperature measurement to 2501°F (1372°C)
- Large triple LCD backlit display
- 2% RH accuracy
- Min/Max, Data hold and Auto power off functions
- Built-in USB port
- Includes Windows® compatible software with USB cable, Type K bead wire probe, carrying case and 9V battery
|
|
EXTECH MO290: Pinless Moisture Psychrometer + IR
8-in-1 Meter with Patented Built-in IR Thermometer
Features:
- Measure Humidity, Air Temperature (with built-in probe) plus non-contact InfraRed Temperature
- Pinless moisture sensor allows to monitor moisture in wood and other building materials with no surface damage
- Remote pin-type probe (MO290-P) for contact moisture readings (3ft/0.9m cable length)
- Select from multiple wood types and measurement ranges
- Easy to read, large dual display with backlit feature
- Simultaneously displays % moisture of wood or material being tested and Air Temperature, IR Temperature, or Humidity
- Pinless measurement depth to 0.75" (19mm) below the surface
- Non-Contact InfraRed Thermometer with 8:1 distance to spot ratio and 0.95 fixed emissivity
- Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP), Dew Point (DP), and Vapor Pressure
- Programmable high/low Moisture and Humidity alarms
- Automatic calculation of differential Temperature (IR - DP) to determine condensation point
- Min/Max and Data Hold, Auto Power Off
- Complete with battery and pouch case
|
|
EXTECH MO295: Pinless Moisture Psychrometer + IR Thermometer
8-in-1 Meter with Memory and Built-in InfraRed Thermometer
Features:
- Monitor moisture in wood and other building materials with virtually no surface damage with the Pinless Moisture sensor
- Includes Pin-type probe (MO290-P) for contact moisture readings
- Manually store/recall up to 20 labeled readings
- Works on multiple wood types and other building materials
- Easy to read, large dual display with backlit feature
- Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
- Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP) and Vapor Pressure
- Programmable high/low Moisture and Humidity alarms
- Automatic calculation of differential Temperature (IR - DP) to determine condensation point
- Min/Max and Data Hold, Auto power off and low battery indication
|
|
EXTECH MO297: Pinless Moisture Psychrometer with IR Thermometer and Bluetooth MeterLink™
8-in-1 Meter with Memory, Built-in IR Thermometer and Wireless Capability
Features:
- Quickly indicates the moisture content of materials with Pinless technology without damaging the surface
- Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length)
- Manually store/recall up to 20 labeled readings
- Works on multiple wood types and other building materials
- Easy to read, large dual display with automatic backlight feature
- Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity
- Pinless measurement depth to 0.75" (19mm) below the surface
- Programmable high/low Moisture and Humidity alarms
- Designed with IR circuit to measure non-contact surface temperature; 8:1 distance to spot ratio with 0.95 fixed emissivity
- Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP), Vapor Pressure, and condensation point
- Fast Analog Bargraph, Min/Max and Data Hold, Auto power off and low battery indication
- MeterLink™ Bluetooth transmitter wirelessly transmits moisture and humidity data to selected FLIR thermal imaging IR cameras to incorporate meter readings with thermal images
- Complete with pin moisture probe with cable, 9V battery and case
|
|
EXTECH RH101: Hygro-Thermometer + InfraRed Thermometer
Humidity, Air Temperature and non-contact Surface Temperature measurements
Features:
- Combination Humidity meter plus InfraRed Thermometer features a super large backlit dual display
- Large backlit LCD dual display
- Primary and Secondary displays
- Primary display is user selectable for IR or Humidity; Secondary always displays ambient temperature
- InfraRed thermometer has built-in laser pointer and an 8:1 distance to target ratio
- Data Hold and MAX, Auto power off
|
|
EXTECH RH401: Digital Psychrometer + InfraRed Thermometer
Humidity, Wet bulb, Dew Point, Air Temperature plus Non-contact IR Temperature
Features:
- Triple display with backlighting
- Displays Air temp+RH+surface temp or Dew Point+RH+surface temp or Wet Bulb+RH+surface temp
- Built-in InfraRed Thermometer with laser pointer and 8:1 distance to target ratio
- Adjustable emissivity from 0.3 to 1.0
- Precision humidity capacitance sensor is retractable for protection during transportation and storage
- Calculates T1 (IR Surface Temperature) - DP (Dew Point) differential
|
|
EXTECH RPM10: Photo/Contact Tachometer with built-in InfraRed Thermometer
Includes a non-contact IR Thermometer for surface temperature measurements Features:
- Built-in IR thermometer with laser measures remote surface temperature on motors and rotating parts
- Provides wide RPM (photo and contact) and Linear Surface Speed (contact) measurements
- Non-contact Photo tachometer uses a Laser for greater measuring distance up to 6.5ft (2m)
- Characters on display reverse direction depending on mode
- Double molded housing
|
< กลับ >
|