|
|
EXTECH LCR200: Passive Component LCR Meter
Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R,P,ESR) Features:
- Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
- Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
- Auto Select measurement function with 1kHz default test frequency
- Five test frequencies
- Set Hi/Lo limits using absolute values or percentage limits
- Relative mode function
- Parallel or Series equivalent circuit
- Auto power off, Low battery and overrange indicators
- Built-in test fixture or use external test leads
- Open and Short calibration removes unwanted stray impedances from the measurement
- Complete with test leads and 9V battery
|
|
EXTECH LCR203: SMD Component Tweezers
Optional tweezers for use with LCR200 LCR meter
Features:
- Cable length: approximately 22" (56cm)
- Max component width: 0.75" (19mm)
- Terminals: 3 banana plugs (High, Low, Guard)
|
|
EXTECH LCR205: SMD Component Fixture
Optional chip component fixture for use with LCR200 LCR meter
Features:
- Adjustment range: 0 to 0.375" (0.95cm)
- Terminals: 3 blades (High, Low, Guard)
- Adjustment knob
|
|
EXTECH 380193: Passive Component LCR Meter
Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R)
Features:
- Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
- Secondary parameter of Q (quality), D (dissipation) or R (resistance)
- Set Hi/Lo limits using absolute values or percentage limits
- Parallel or Series equivalent circuit
- Automatic blown fuse indication
- Built-in test fixture or use external test leads
|
|
Precision
LCR Tester ( LCR 819)
High Precision LCR Instruments
FEATURES
1. 12Hz to 100kHz, 503 Continuously Variable Frequencies
2. 0.05% High Measurement Accuracy (LCR-817/819/827/829)
3. 0.1% High Measurement Accuracy (LCR-816/826/827/829)
4. 100 Sets Memory for Save/Recall of Setup State
5. R/Q, C/D, C/R, L/Q Test Modes
6. Absolute Value, DValue, and D% Measurement Display
7. 240 x 128 dot Matrix LCD Display
8. Handler Interface (LCR-826/827/829)
9. Test Condition and Test Result shown on the screen Simultaneously |
|
|
|
LCR Meter, LCR Test Lead ( LCR-610,
TL-06)
Features:
- L.C.R. 3-function measurement.
- 1% Basic accuracy.
- High resolution 0.1uH, 0.1pF and
1mΩ.
- 0.1uH to 200H inductance measurement.
- 1mΩ to 20MΩ resistance
measurement.
- Dissipation factor measurement.
- Zero adjustment.
- The test lead TL-06 (Option) is specially designed for measuring
SMD (Surface mount device) resistor, capacitor and inductor.
|
|
|
|
20000 Counts LCR Meter
Dual Display Auto-Ranging
MODEL: LCR-612
Outstanding Features:
1.Basic accuracy:
0.5% for Resistance
0.7% for Inductance, Capacitance
2.Dual Displays provide quick tested results readouts, with L.C.R. Display
values up to 19999 counts and Q.D.R. display values up to 9999 counts
3.Excellent resolutions:
Resistance up to 0.001£[
Inductance Capacitance up to 0.1uH/0.1pF
4.Provided up to 4 testing parameters:
Ls+(Q,D,Rs), Lp+(Q,D,Rp)
Cs+(Q,D,Rs), Cp+(Q,D,Rp)
|
|
|
|
Models 878 and 879 - LCR Meters
These LCR meters measure capacitance, resistance (of non-inductive components)
and inductance. Components can be measured
- Selectable test frequencies
- Simultaneously displays measured component value | and Q or Dissipation
Factor (D)
- Display hold
- Relative mode
- Tolerance mode
- RS232 interface (cable and software required)
|
|
|
|
Models VC30, VC231, - LCR and CR Meters
/ Hand-held Components Testers
28 control positions to test a w
- Measures inductance, capacitance and resistance
- 28 control positions to test a wide range of components
- Inductance with seven ranges from 200µH to 200H
- Capacitance has nine ranges from 200pF to 20mF
- Resistance with seven ranges from 20ohm to 20Mohm
- Zero out stray resistance with front panel control
- Also tests diodes, microwave diodes and transistors
- Shipped with safety test leads w/screw-on alligator clips, protective
holster and manual
|
|
|
< กลับ >
|