|
< กลับ >
|
EXTECH MS6100: 100MHz 2-Channel Digital Oscilloscope
5.6" color LCD display, 23 automatic measurements, waveform recorder
Features:
- One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
- Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
- Built-in 6,000 count True RMS MultiMeter with analog bargraph
- Easy-to-use pop-up menu with built-in multi-language system
- 23 Automatic Measurements
- Waveform Math: Add, Subtract, Multiply, and Divide
- Store and recall up to 1000 waveform screens and setups using the installed 2G microSD card
- Automatic cursor tracking measurements
- Pass-Fail function compares a stored waveform to an unknown input
- Average Mode for smoothing waveforms
- Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
- Square Wave Output (2V, 1kHz) for probe adjustment
- Complete with two 1X/10X oscilloscope probes, test leads, 7.4V Li-Ion battery, universal AC charger, and carrying case
|
|
EXTECH MS6060: 60MHz 2-Channel Digital Oscilloscope
5.6" color LCD display, 23 automatic measurements, waveform recorder
Features:
- One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
- Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
- Built-in 6,000 count True RMS MultiMeter with analog bargraph
- Easy-to-use pop-up menu with built-in multi-language system
- 23 Automatic Measurements
- Waveform Math: Add, Subtract, Multiply, and Divide
- Store and recall up to 1000 waveform screens and setups using the installed 2G microSD card
- Automatic cursor tracking measurements
- Pass-Fail function compares a stored waveform to an unknown input
- Average Mode for smoothing waveforms
- Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
- Square Wave Output (2V, 1kHz) for probe adjustment
- Complete with two 1X/10X oscilloscope probes, test leads, 7.4V Li-Ion battery, universal AC charger, and carrying case
|
|
EXTECH MS420: 20MHz 2-Channel Digital Oscilloscope
Dual-channel Oscilloscope with 3.8" (97mm) color LCD display
Features:
- Auto-set function optimizes the position, range, timebase, and triggering to assure a stable display of waveforms
- Peak Detect function for 50ns glitch capture
- XY Mode and FFT function to view component frequencies
- Twenty Automatic Measurements including Frequency, Cycle, Average, Peak to Peak, RMS and more
- Waveform Math: Add, Subtract, Multiply, and Divide
- Average Mode for smoothing waveforms
- Persistence Mode for observing dynamic signals
- Store and recall up to 4 waveform screens and setups
- USB interface and software for transferring waveforms and data
|
|
EXTECH TL625: 100MHz 2000V High Voltage Oscilloscope Probe
Replacement Probe for MS6000 series Oscilloscopes |
|
EXTECH TL620: 200MHz 1X/10X Oscilloscope Probe
Replacement Probe for MS6000 series Oscilloscopes |
|
EXTECH BATT-74V: 7.4V Li-Ion Rechargeable Battery
Replacement battery for MS6000 series Oscilloscopes |
|
|