|
EXTECH AUT-TL: Car Fuse Adapter Test Leads
Automotive Fuse Adaptor with ATC-blade connector
Features:
- ATC-blade connector plug into the fuse block
- Measuring range: 20A/48VDC (10 sec max)
- 2.6ft (80cm) connector cable with standard shrouded right-angle banana plugs for use with virtually any DMM with a 20A current input
- ±2% accuracy
|
|
EXTECH AUT-TLM: Car Fuse Adapter Test Leads
Automotive Fuse Adaptor with Mini-blade connector
Features:
- Mini-blade connector plug into the fuse block
- Measuring range: 20A/48VDC (10 sec max)
- 2.6ft (80cm) connector cable with standard shrouded right-angle banana plugs for use with virtually any DMM with a 20A current input
- ±2% accuracy
|
|
EXTECH TL900: SafeSense™ CAT IV Fused Test Leads
Detects the Presence of Voltage Even With a Blown Fuse for Increased Safety
Features:
- Intelligent SafeSense™ technology makes it easy for user to know if voltage is present on target area being measured, even with a blown fuse, for increased safety
- Two dual-layered silicone test lead cables (5.3ft/1.6m long) with wear indication construction
- Standard 90° shrouded banana-to-banana plug connectors fit most multimeter input jacks
- Two CAT IV probes have built-in replaceable fuses (1000V, 11A, 20kA breaking capacity)
- CAT IV-600V, CAT III-1000V, 10A with protective safety cap
- Each probe has 2mm probe tip and includes a 4mm brass caged bayonet threaded tip (removable) for connecting accessories
|
|
EXTECH TL841: Test Lead Kit
16-piece kit with multiple test lead tip configuration
Features:
- Test Lead Set with Straight Probes, CAT III-1000V, 16A
- Alligator Clip Set, 5A, CAT III-300V
- TL743 - Slim Reach Test Probe Set
- Spade Lugs, 0.16" (4mm) opening, 30VAC/60VDC, 5A
- Test Leads, Right Angle, Straight End, CAT III-1000V, 16A
- Test Leads with Hook Tip, Pincer Tip, and Couplers
- Conveniently stored in a pouch case
|
|
EXTECH TL833: Industrial Test Lead Set
11-piece kit with CAT III-1000V rating
Features:
- TL726 - Double Molded Silicone Test Leads
- TL740 - Industrial Plunger Style Test Clips
- TL741 - Heavy Duty Plunger Style Hook Clip Set
- TL708 - Large Alligator Clip Set
- TL743 - Slim Reach Test Probe Set
- Type K Bead Probe with Banana Plug
- Conveniently stored in a pouch case
|
|
EXTECH TL831: Master Electrical Test Lead Kit
12-piece kit industrial grade test leads
Features:
- TL726 - Double Molded Silicone Test Leads
- TL747 - Electronic Sharp Test Probe Set
- TL741 - Heavy Duty Plunger Style Hook Clip Set
- TL742 - Heavy Duty Plunger Style Pincer Grip Set
- TL740 - Industrial Plunger Style Test Clips
- TL709 - Medium Alligator Clip Set
- Conveniently stored in a pouch case
|
|
EXTECH TL805: Double Injected Test Leads
Double molded test leads with non-slip comfort grip
Features:
- Professional grade test leads compatible with most multimeters
- Double coated PVC lead wire with white inner layer to easily identify damaged leads
- Heavy duty chromium plated brass tips, 0.16" (4mm) long with removable category control tip covers
- Shrouded, non-twist banana plugs for reduced socket wear
- “Superflex” molded strain reliefs for improved cable flexibility
- “D” shaped finger guards allow easy access to narrowly spaced test points
|
|
EXTECH TL810: Electrical Test Lead Kit
8-piece double insulated test lead kit ideal for electrical applications
Features:
- Two 40" (1m) PVC lead extensions (1000V rating) with shrouded banana plugs on both ends
- Two very sharp, extra long 0.75" (19mm) stainless steel tipped plug-on test probes
- Two stainless steel flat tip test probes (0.6"/15mm long)
- Two plunger activated retractable jaw clips with a wide 0.75" (19mm) jaw opening
|
|
EXTECH TL809: Electronic Test Lead Kit
8-piece test lead kit ideal for the testing of digital circuitry
Features:
- Two 42" (1m) PVC lead extensions with shrouded banana plugs at both ends
- Two modular 4" (102mm) Heavy Duty test probe handles with 0.16" (4mm) banana plug tip
- Two plunger mini-hooks
- Two alligator clips with removable insulators
- Includes 3-compartment sealable nylon pouch to organize/protect your test leads
|
|
EXTECH TL808-KIT: Professional Test Lead Kit
8-piece Kit with CATIII-1000V safety rating and carrying case
Features:
- Two 42" (1m) PVC lead extensions with shrouded banana plugs at both ends
- Two modular 4" (102mm) Heavy Duty test probe handles with 0.16" (4mm) banana plug tips
- Two standard size alligator clips with insulated rubber boot
- Two extra large, double-insulated alligator clips with sharp teeth for piercing insulated wires - jaw opens 0.8" (20mm)
- Includes carrying case provides storage for the kit and additional space to hold your meter
|
|
EXTECH TL807C: Insulated Alligator Clips
Push-on alligator clips for standard test leads
Features:
- Insulated with rubber boot
- Push-on mount
- Compatible with standard test leads (TL803 or TL805)
|
|
EXTECH TL806: Double Insulated Alligator Clips
Large double insulated alligator clips with sharp teeth
Features:
- Extra large alligator clips mate with banana plug patch cords
- Jaw opens up to 0.8" (20mm)
- Sharp teeth for piercing insulated wire
- One end features a 0.16" (4mm) safety jack
- Complies with the IEC1010 standard
|
|
EXTECH TL748: Spring Loaded Hook Tip Probes
Ideal for gripping a component lead or fine wire
Features:
- 1000V, 5A max
- 0.04" (1mm) gripping diameter
- 4.7" (120mm) overall length
|
|
EXTECH TL803: General Purpose Test Leads
Standard test leads with protective tip caps
Features:
- Standard replacement test leads compatible with most multimeters
- Shrouded banana connectors, molded strain reliefs
- Two sharp 0.16" (4mm) long tips with removable category control tip covers for safe storage
|
|
EXTECH TL747: Electronic Sharp Test Probe Set
For use on high density components and boards and for piercing insulation
Features:
- 1000V, 6A max
- 0.35" (9mm) long tip with sharp 0.08" (2mm) diameter
- 4" (102mm) overall length
|
|
EXTECH TL744: Flat Blade Test Probe Set
Designed to fit outlet receptacles
Features:
- 1000V, 10A
- 0.7" (17mm) long x 0.1” (2.5mm) flat tip
- 4.9" (124mm) overall length
|
|
EXTECH TL743: Slim Reach Test Probe Set
Sharp point for piercing insulation
Features:
- 1000V, 16A
- 0.7" (18mm) long tip with sharp 0.08" (2mm) diameter
- 4.5" (115mm) overall length
- Includes protective cap
|
|
EXTECH TL742: Heavy Duty Plunger Style Pincer Grip Set
Insulated, flexible silicon shaft with good heat resistance
Features:
- 1000V, 4A
- 0.2" (5mm) jaw opening
- 6" (152mm) overall length
|
|
EXTECH TL741: Heavy Duty Plunger Style Hook Clips
Spring loaded clip for gripping component lead or wire
Features:
- 1000V, 10A
- 0.08" (2mm) gripping diameter
- 5.5" (140mm) overall length
|
|
EXTECH TL740: Industrial Plunger Style Test Clip Set
Spring loaded clip with steel jaws
Features:
- 1000V, 10A
- 0.6" (15mm) jaw opening
- 6.1" (155mm) overall length
|
|
EXTECH TL726: Double Molded Silicone Test Lead Set
Right angle and straight end flexible leads with shrouded banana plugs
Features:
- 63" (1.6m) long
- Protective collar and insulated sleeve
- 1000V, 10A
|
|
EXTECH TL709: Medium Alligator Clips
Toothed jaws for solid gripping of fine wires
Features:
- 1000V, 16A
- 1.4" (37mm) jaw length
- 0.8" (20mm) jaw opening
- 3.9" (98mm) overall length
|
|
EXTECH TL708: Heavy Duty Large Alligator Clips
Toothed jaws for solid gripping of fine wires
Features:
- 1000V, 6A
- 1" (26mm) jaw length
- 1.6"(40mm) jaw opening
- 4.2" (107mm) overall length
|
|
EXTECH TP200: Type K Pipe Clamp Temperature Probe (-4 to 200°F)
Hands-free superheat/subcooling temperature measurement
Features:
- Spring-loaded jaw for secure grip on pipe from 0.25" (6.35mm) to 1.5" (38mm) diameter
- For use with any Thermometer or MultiMeter with a Type K thermocouple input
- Measurement range: -4 to 200°F (-20 to 93°C)
- Accuracy: ±5% full scale
- Complete with attached 36" (0.9m) cable and Type K connector
|
|
EXTECH TP870: Bead Wire Type K Temperature Probe (-40 to 482°F)
Type K temperature probe with mini connector
Features:
- Temperature range: -40 to 482°F (-40 to 250°C)
- Type K mini connector
- Compatible with most multimeters that have Type K temperature function
|
|
EXTECH TP873: Bead Wire Type K Temperature Probe (-22 to 572°F)
Type K temperature probe with mini connector and banana plug adaptor
Features:
- Temperature range: -22 to 572°F (-30 to 300°C)
- Type K mini connector and banana plug adaptor
- Compatible with most multimeters that have Type K temperature function
|
|
EXTECH TP875: Bead Wire Type K Temperature Probe (-58 to 1000°F)
Type K high temperature probe with mini connector and banana plug adaptor
Features:
- High temperature range: -58 to 1000°F (-50 to 538°C)
- 39" (1m) cable, type K mini connector and banana plug adaptor
- Compatible with most multimeters that have Type K temperature function
|
|
EXTECH TP882: Type K Penetration Probe (-50 to 1000°F)
Type K high temperature probe with mini connector
Features:
- High temperature range: -50 to 1000°F (-46 to 538°C)
- Type K mini connector
- Compatible with most multimeters that have Type K temperature function
|
|
EXTECH 881602: Type K Surface Probe (-40 to 932°F)
Type K high temperature probe with mini connector
Features:
- High temperature range: -40 to 932°F (-40 to 500°C)
- 70.8" (1.8m) coiled cable with Type K mini connector
- Compatible with most multimeters that have Type K temperature function
- 6" (150mm) probe length; 0.314" (8mm) diameter
|
|
EXTECH 409992: Small Carrying Case
Soft vinyl carrying case (6.25 x 4.5 x 1")
Features:
- Size: 6.25 x 4.5 x 1" (159 x 114 x 25mm)
|
|
EXTECH 409996: Medium Carrying Case
Soft vinyl carrying case (7.8 x 5.3 x 1.6")
Features:
- Size: 7.8 x 5.3 x 1.6" (197 x 133 x 41mm)
|
|
EXTECH 409997: Large Carrying Case
Soft vinyl carrying case (9.5 x 7 x 2") with wrist strap
Features:
- Size: 9.5 x 7 x 2" (243 x 178 x 51mm)
|
|
EXTECH 872502: Bead Wire Type J Temperature Probe (-40 to 392°F)
Temperature probe with subminiature Type J connector
Features:
- Temperature range: -40 to 392°F (-40 to 200°C)
- 39" (1m) cable with subminiature Type J connector
- Compatible with most multimeters that have Type J temperature function
|
|
EXTECH 881616: Magnetized Type K Surface Probe (-40 to 482°F)
Type K temperature probe with mini connector
Features:
- Temperature range: -40 to 482°F (-40 to 250°C)
- Probe surface area: 1" x 0.75"
- 6ft teflon cable with strain relief
- Includes replacement temperature element
|
|
EXTECH CA500: Medium Carrying Case
Soft vinyl carrying case (7.4 x 3.5 x 2.5") with shoulder strap and side pockets
Features:
- Size: 7.4 x 3.5 x 2.5" (188 x 89 x 64mm)
|
|
EXTECH CA899: Large Carrying Case
Soft vinyl carrying case (10 x 5 x 3") with shoulder strap
Features:
- Size: 10 x 5 x 3" (254 x 127 x 76mm)
|
|
EXTECH CA900: Wide Carrying Case for MultiMeter Kits
Soft vinyl carrying case (9.8 x 8 x 2") with wrist strap
Features:
- Size: 9.8 x 8 x 2" (248 x 203 x 51mm)
|
|
EXTECH CA904: Hard Plastic Carrying Case
Carrying case (11.7 x 8.9 x 3") with foam insert and accessories pouch
Features:
- Size: 11.7 x 8.9 x 3" (297 x 226 x 76mm)
|
|
EXTECH CA-EXTECHTB: Professional Tool Bag
Rugged Tool Bag with Numerous Inner Compartments and Shoulder Strap
Features:
- Attractive, heavy duty fabric bag design
- Rugged rubberized protective bottom
- Large zippered storage compartment with ten internal side pockets
- Convenient nine small external pockets for small tools or accessories plus one medium size mesh pocket on the side
- Comfortable adjustable and removable shoulder strap (approx 4.4ft/1.3m including metal clips)
- Rubberized handle for comfortable grip
- Two front adjustable straps can be used for tools/accessories with clips
- Provides on the job protection and organization for your meters, tools, and accessories
- Dimensions: 17 x 9 x 11.5" (43.2 x 22.9 x 29.2cm); Weight: 4.5lbs (2kg)
|
|
EXTECH TP400: High Temperature Type K Pipe Clamp (-4 to 450°F)
Hands-free superheat/subcooling temperature measurement
Features:
- Spring-loaded jaw for secure grip on pipes from 0.25" (6.35mm) to 1.5" (38mm) diameter
- For use with any Thermometer or MultiMeter with a Type K thermocouple input
- Measurement range: -4 to 450°F (-20 to 232°C)
- Accuracy: ±3.6°F (1.8°C)
- Complete with attached 36" (0.9m) cable and Type K connector
|
|
EXTECH TP873-5M: Extra Long Bead Wire Type K Temperature Probe (-22 to 572°F)
Type K temperature probe with mini connector and banana plug adaptor
Features:
- Long cable - 16.4ft (5m)
- Temperature range: -22 to 572°F (-30 to 300°C)
- Type K mini connector and banana plug adaptor
- Compatible with most multimeters that have Type K temperature function
|