 |
Eagle-Eye ® Alarm
Series FR Accessory
The Eagle-Eye® Alarm is a rugged, splash resistant
accessory for all square FR - Series flow meters. It features a non-contact
sensor that is not affected by contaminants in the flow stream, and has
integral red and green LEDs and audible buzzer to indicate the operating
state. Multiple units may be installed on a single flowmeter to provide
multiple thresholds. The Eagle-Eye™ Alarm has low level digital
output, that when used with the advanced power supply (EPS004), outputs
a 0 & 5 volt signal.
Features:
• Integral red and green LEDs and audible buzzer
indicate operating state
• Low level digital output represents operating state,
available with advanced power supply
• Non-contact sensor is not affected by contaminants
in the flow stream
• Field installable, flowmeter may remain in service
during installation
• Ideal for low flow with no additional pressure drop
|
|
OptAlarm ®
Hi/Low Alarm
8400 Series Alarm Series
8400 OptAlarm® Optical
flow alarming system that allows the user to set allowable flow limits
manually. There are three flow alarm options: Hi & Low, Hi, or Low
flow limits with visiual or audible alarm indications. Additionally NO/NC
dry contact is available as standard.
Features:
• Optical flow sensing system
• Set allowable flow limits manually
• Three flow alarm options:
• High Alarm
• Low Alarm
• Visual and audible alarm
indication
• Dry contact NO/NC
• Reset alarms remotely
|
 |
Series PV9000
Volumetric Flowmeter for Gases
Series PV 9000 Electronic flowmeters,
using differential pressure measurement / laminar flow element flow sensing
technology, accurately measures the flow rate of non-hazardous, inert gases
with an accuracy of ± 2%
of full scale. The standard output for the PV 9000 meter is 0.0 - 5.0 VDC;
the meter is also available with an integral or remote digital display,
or 4 - 20 mA current signal. These electronic flow meters can be installed
in any orientation with no effect on flow reading. All units are supplied
with an aluminum body, high-impact resistant polycarbonate case and brass
compression fittings.
Features:
• Can be installed in any orientation
with no effect on the flow rate
• High-impact resistant polycarbonate case
• Aluminum Body
• Accuracy of ± 2% of Full Scale
• Available with integral or remote digital display
• 0.0 - 5.0 VDC output/4-20 mA Standard
• 0-5 VDC RS232 & Integral Display Model Available
|
