|
|
EXTECH EC170: Salinity/Temperature Meter
Waterproof meter with high-accuracy multi-ranging sensor
Features:
- Measure Salinity in aquaculture, environmental studies, ground water, Koi ponds, irrigation, drinking water, and other applications
- Autoranging with 2 ranges of measurement
- Built-in NaCl Conductivity to TDS conversion factor
- Large 3-1/2 digit (2000 count) dual LCD
- Data Hold, Auto Power Off and Low Battery Indication
- Automatic Temperature Compensation
- Fixed Temperature Coefficient and Normalization Temperature
- One calibration point per range
- Waterproof design to withstand wet environment – meets IP65 standard
- Complete with salinity sensor, protective sensor cap, and 4 LR44 button batteries
|
|
EXTECH EC210: Compact Conductivity/TDS Meter
Measures Conductivity, TDS and Temperature
Features:
- Simultaneous display of Conductivity or TDS with Temperature
- Three ranges for Conductivity and TDS plus adjustable Temperature compensation factor to maintain accuracy
- Automatic Temperature Compensation
- Temperature compensation factor adjustable between 0 to 5.0% per °C
- Min/Max and Data Hold functions
- Auto Power Off with disable feature
- Use optional 1413µS Conductivity Standard (EC-1413-P) for calibration
- Complete with Conductivity cell and 39" (1m) cable, 9V battery, and soft case
|
|
EXTECH WQ510: Benchtop Water Quality Meter/Stirrer
Magnetic stirrer with Conductivity, TDS, Salinity, pH, mV, and Temperature measurements
Features:
- Built-in stirrer with 30, 60, and 120 minute timer or continuous operation
- Large backlit dual LCD simultaneously displays measurement and temperature
- 2 or 3 point pH calibration for better accuracy (4, 7, and 10pH)
- One point Conductivity calibration - automatically recognizes 4 calibration solutions
- Adjustable Conductivity to TDS ratio from 0.5 to 1.0
- Automatic Temperature Compensation
- Memory stores up to 150 readings
- Complete with pH & conductivity probes & calibration solutions, temperature probe, electrode clamp and rod, software and USB cable and AC adapter
|
|
EXTECH WQ530: Benchtop Water Quality Meter/Stirrer
Magnetic stirrer with DO, Conductivity, TDS, Salinity, pH, mV, and Temperature measurements
Features:
- Built-in stirrer with 30, 60, and 120 minute timer or continuous operation
- Large backlit dual LCD simultaneously displays measurement and temperature
- 2 or 3 point pH calibration for better accuracy (4, 7, and 10pH)
- Manual salinity (0-50ppt) and altitude (0-20k ft) compensation for DO measurements
- One point Conductivity calibration - automatically recognizes 4 calibration solutions
- Adjustable Conductivity to TDS ratio from 0.5 to 1.0
- Automatic Temperature Compensation
- Memory stores up to 150 readings
- Complete with pH, conductivity & DO probes & calibration/fill solutions, temperature probe, electrode clamp and rod, software and USB cable and AC adapter
|
|
EXTECH 341350A-P: Oyster™ Series pH/Conductivity/TDS/ORP/Salinity Meter
Oyster™ meter with mini pH electrode and Polymer conductivity cell
Features:
- Large LCD built into adjustable “flip-up” cover displays measurement and Temperature simultaneously
- Microprocessor based with splash proof housing and front panel tactile touch pad to slope and calibrate
- Rugged design for handheld or benchtop use; neckstrap for “hands-free” operation
- Memory function stores and recalls 25 labeled readings
- Automatic Temperature Compensation for Conductivity/TDS via thermistor built into conductivity cell
- Manual Temperature Compensation for pH (0 to 100°C)
- Thermistor probe measures from 32 to 194°F (0 to 90.0°C)
- Complete with mini pH electrode, sample buffers, polymer conductivity cell for TDS/Conductivity/Salinity, thermistor probe, 9V battery, neckstrap and carrying case
|
|
EXTECH DO610: ExStik® II DO/pH/Conductivity Kit
Measures Dissolved Oxygen, pH, Conductivity, TDS, Salinity and Temperature
Features:
- Includes EC500 pH/Conductivity meter with combination high accuracy multi-ranging Conductivity sensor for Conductivity, TDS, Salinity, pH and Temperature measurements
- Includes DO600 Dissolved Oxygen meter with electrode, replacement membrane cap, electrolyte, and polishing paper
- Complete with 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 plastic cups, batteries and carrying case
|
|
EXTECH EC100: Conductivity/Temperature Meter
Waterproof meter with high-accuracy multi-ranging sensor
Features:
- Units of measure include µS/cm, mS/cm, ppm, ppt
- Large 3-1/2 digit (2000 count) LCD display
- Data Hold and low battery indication
- Auto Power off with disable
- Adjustable Automatic Temperature Compensation
- Simultaneous display of Conductivity plus Temperature
- Two ranges for Conductivity with one point calibration per range
- Waterproof design to withstand wet environment – meets IP65 standard
- Includes meter, protective sensor cap, and four LR44 button batteries. Conductivity standards sold separately (required for calibration)
|
|
EXTECH EC150: Conductivity/TDS/Temperature Meter
Waterproof meter with high-accuracy multi-ranging sensor
Features:
- Units of measure include µS/cm, mS/cm, ppm, ppt
- Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 — conveniently calculates the TDS value
- Large 3-1/2 digit (2000 count) LCD display
- Data Hold and low battery indication
- Auto Power off with disable
- Adjustable Automatic Temperature Compensation
- Simultaneous display of Conductivity or TDS plus Temperature
- Two ranges for Conductivity and TDS with one point calibration per range
- Waterproof design to withstand wet environment – meets IP65 standard
- Includes meter, protective sensor cap, and four LR44 button batteries. Conductivity standards sold separately (required for calibration)
|
|
EXTECH EC400: ExStik® Conductivity/TDS/Salinity Meter
4-in-1 multi-range sensor for measuring Conductivity, TDS, Salinity and Temperature
Features:
- Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution
- Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L
- Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value
- Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
- Data Hold, Auto Power Off and low battery indication
- Automatic Temperature Compensation of 2% per °C
- Simultaneous display of Conductivity, TDS, or Salinity plus Temperature
- Internal memory stores up to 25 labeled readings for easy recall
- Self calibration of electronics on power up
- Order Conductivity standards separately
- Complete with meter and Conductivity cell, protective cap, sample cup, four CR2032 batteries, and 48"(1.2m) neckstrap
|
|
EXTECH EC410: EC410 - ExStik® Conductivity/TDS/Salinity Kit
Waterproof meter with high accuracy multi-range sensor that measures four parameters
Features:
- Includes EC400 meter with sensor, 3 calibration standards, weighted base, 3 plastic cups, batteries and carrying case
- Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution
- Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L
- Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value
- Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
- Data Hold, Auto Power Off and low battery indication
- Automatic Temperature Compensation of 2% per °C
- Simultaneous display of Conductivity, TDS, or Salinity plus Temperature
- Internal memory stores up to 25 labeled readings for easy recall
- Self calibration of electronics on power up
|
|
EXTECH EC500: Waterproof ExStik® II pH/Conductivity Meter
Combination flat surface pH electrode with autoranging high accuracy Conductivity cell
Features:
- Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
- 9 units of measure: pH, µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
- Analog bargraph indicates trends
- Memory stores up to 25 labeled readings
- Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
- RENEW feature alerts user when electrode needs replacement
- Order Conductivity standards and pH buffers separately
- Complete with meter and electrode, protective cap, sample cup, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap
|
|
EXTECH EC510: Waterproof ExStik® II pH/Conductivity Meter Kit
Combination flat surface pH electrode with autoranging high accuracy Conductivity cell
Features:
- Kit includes: EC500 meter, 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 cups, batteries and carrying case
- Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
- 9 units of measure: pH, µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
- Analog bargraph indicates trends
- Memory stores up to 25 labeled readings
- Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
- RENEW feature alerts user when electrode needs replacement
|
|
EXTECH EC600: Waterproof Conductivity Kit
7-in-1 Meter with Lab-Quality Performance
Features:
- Measures Conductivity, TDS, Salinity, Resistivity, pH, mV and Temperature
- Automatic one button pH calibration (4, 7, and 10pH)
- Choice of 3 point pH calibration for better accuracy
- One point Conductivity calibration - automatically recognizes 8 calibration solutions from USA, Europe and China series
- Automatic Temperature Compensation (non-linear compensation for purified water <10µS/cm to improve measuring accuracy)
- Memory stores up to 300 readings with series number, measured value and temperature
- Large blue backlit dual LCD display
- Auto power off saves battery life with disable function
- Waterproof housing
- Complete with pH/mV/Temperature electrode, polymer Conductivity cell, pH and Conductivity calbration solutions, batteries and hard carrying case
|
< กลับ >
|