|
|
EXTECH PQ2071: 1-/3-Phase 1000A True RMS AC Power Clamp Meter
Multifunction Meter with Built-In Non-Contact Voltage Detector
Features:
- Meter operates as a True RMS Clamp Meter, Power Meter, Multimeter, and AC Voltage Detector
- Measures AC Current, Voltage, Frequency and Power including True Power, Apparent Power, Reactive Power and Active Power
- Measures 1-Phase and balanced 3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Active Power (kWh), plus Power Factor and Phase Angle
- 2.16" (55mm) clamp jaw opening
- Large dual backlit LCD display (9999 count) with bargraph
- Built-in non-contact Voltage Detector with LED alert
- Manually store/recall up to 99 data sets
- Data Hold, Max/Min, and Auto power off
- USB interface for connection to a PC for datalogging function with included software
- Complete with test leads, four color-coded leads and alligator clips, USB cable, PC software, 9V battery, and soft case
|
|
EXTECH 382100: 1200A 3-Phase Power Analyzer/Datalogger
Datalogging Power Analyzer (up to 30,000 sets of measurements)
Features:
- Single phase, 3-phase/3-wire or 3-phase/4-wire systems
- Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
- Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
- Current measurements to 1200A and Voltage measurements to 600V
- MWH, MVAh, MVARh energy measurements
- Adjustable CT ratio (1 to 600) and PT ratio (1 to 1000)
- Automatically logs up to 30,000 sets of measurements with 2GB SD memory card
- User-programmable sampling time from 2 to 7200 seconds
|
|
EXTECH 380803: True RMS Power Analyzer Datalogger
Compact, battery operated datalogging appliance tester for analyzing AC/DC power loads
Features:
- Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
- Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
- True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
- Plug device to be tested directly into the Power Analyzer
- Max, Data Hold and Overload Protection
- Battery or AC adaptor provides line isolation
- Sampling (update) rate is 2.5 times/second
- Software included to download and store data to a PC
- For use in countries with 110-117V only!
|
|
EXTECH 380940: 400A True RMS AC/DC Watt Clamp-on
Measures Watts, Current, and Voltage
Features:
- Large LCD with 40 segment analog bargraph
- Data Hold, Max/Min recall, Auto Zero (DC current), plus low battery indication
- Auto power off
- To download the correct user's manual, please check your product's serial number (on the back of the unit). A product revision has occurred only if the SN begins with a letter (A, B, etc.)
|
|
EXTECH 380976-K: Single Phase/Three Phase 1000A AC Power Clamp Meter Kit
Measures Current, Insulation Resistance, Temperature (Type K) and Power
Features:
- 1.6" (40mm) clamp jaw opening and large dual LCD display (9999 count)
- Measures 1/3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR), Horsepower (HP), Power Factor, and Phase Angle with Lead/Lag indicator
- AC+DC µA current with 10nA resolution for flame rod tests
- Auto Detect AC/DC Voltage measurements with simultaneous frequency display
- Capacitance to 7000µF with 0.001µF resolution
- High Resistance tests to 100MOhm
- Type K, °C/°F switchable, temperature to 1000°F
- Diode and Continuity tests
- Complete with test lead kit, general purpose Type K thermocouple probe, carrying case, and 9V battery
|
|
EXTECH 382075: 2000A True RMS AC/DC 3-Phase Clamp-on Power Analyzer
Measures, computes, and displays 3-Phase Power on Balanced or Unbalanced Loads
Features:
- Display Lead/Lag Current/Voltage phase shift in degrees
- Store/recall last 5 readings
- DC Current Auto-Zero
- Dual displays: kW+PF, kVA+kVAR, phase-angle+Hz, Volts+Hz, or Amps+Hz
- Advanced Relative and Min/Max functions
|
|
EXTECH PQ1000: Voltage Test Leads
Set of 4 test leads with alligator and plunger clips
Features:
- Compatible with PQ3400 series of power analyzers
|
|
EXTECH PQ3350-1: 3-Phase Power & Harmonics Analyzers
Complete with 1200A 12" flexible current clamp probes
Features:
- Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
- Flexible clamp probes can be used for wrapping around bus bars and wire bundles
- Large backlighting LCD displays up to 35 parameters in one screen
- Clamp-on True RMS power measurements with on-screen Harmonics display
- Simultaneous display of Harmonics and Waveform
- Display of Waveform with Peak Values (1024 samples/period)
- Analysis of Total Harmonic Distortion (THD-F)
- Maximum Demand (MDkW, MW, kVA, MVA) with programmable period
- Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000)
- Graphic Phase diagram with 3-Phase system parameters
- 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%)
- Calculated Unbalanced Current through Neutral Line (In)
- Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%)
- Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics
- Includes 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case
|
|
EXTECH PQ3350-3: 3-Phase Power & Harmonics Analyzers
Complete with 3000A 24" flexible current clamp probes
Features:
- Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
- Flexible clamp probes can be used for wrapping around bus bars and wire bundles
- Large backlighting LCD displays up to 35 parameters in one screen
- Clamp-on True RMS power measurements with on-screen Harmonics display
- Simultaneous display of Harmonics and Waveform
- Display of Waveform with Peak Values (1024 samples/period)
- Analysis of Total Harmonic Distortion (THD-F)
- Maximum Demand (MDkW, MW, kVA, MVA) with programmable period
- Adjustable CT ratio (1 to 3000) and VT ratio (1 to 600)
- Graphic Phase diagram with 3-Phase system parameters
- 3-phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor (d0%, d2%)
- Calculated Unbalanced Current through Neutral Line (In)
- Capture 28 Transient events (including Dip, Swell and Outage) with programmable threshold (%)
- Optically isolated USB interface with software to download Waveforms, Power Parameters and Harmonics
- Includes 3 flexible current clamps, 4 voltage leads with alligator clips and retractable plunger clips, 8 AA batteries, universal AC adaptor, software, USB interface cable, and case
|
|
EXTECH PQ34-12: 1200A Current Clamp Probes
Set of 3 clamp probes with 2" (50mm) jaw opening |
|
PQ34-2: 200A Current Clamp Probes
Set of 3 clamp probes with 0.8" (19mm) jaw opening |
|
EXTECH PQ34-30: 3000A Current Flexible Clamp Probes
Set of 3 clamp probes with 24" (600mm) perimeter
Features:
- Max conductor size: oval - 8.5"/216mm; round - 7"/177mm
|
|
EXTECH PQ3450: 3-Phase Power Analyzer/Datalogger
Datalogging Power Analyzer (up to 30,000 sets of measurements)
Features:
- Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu
- Full system analysis with up to 35 parameters:
- V (phase-to-phase), V (phase-to-ground)
- A (phase-to-ground)
- KW / KVA / KVAR / PF (phase)
- KW / KVA / KVAR / PF (system)
- KWH / KVAH / KVARH / PFH (system)
- Phase angle
- Optional 200A, 1200A Current Clamps or 3000A Flexible Current Probes (sold separately)
- Adjustable Current Transformer CT (1 to 600) and Potential Transformer PT (1 to 1000) ratio for high power distribution systems
- Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
- Wide sampling rate range (2 seconds to 2 hours)
- Built-in Clock and Calendar
- Complete with 4 voltage leads with alligator clips, 8 AA batteries, SD card, 100-240V AC adaptor and case. Clamp probes sold separately.
|
|
EXTECH PQ3470: 3-Phase Graphical Power & Harmonics Analyzer/Datalogger
Datalogging Power Analyzer (up to 30,000 sets of measurements)
Features:
- Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu
- Full system analysis with up to 35 parameters:
- V (phase-to-phase), V (phase-to-ground)
- A (phase-to-ground)
- KW / KVA / KVAR / PF (phase)
- KW / KVA / KVAR / PF (system)
- KWH / KVAH / KVARH / PFH (system)
- Phase angle
- Optional 200A, 1200A Current Clamps or 3000A Flexible Current Probes (sold separately)
- Adjustable Current Transformer CT (1 to 600) and Potential Transformer PT (1 to 1000) ratio for high power distribution systems
- Simultaneous display of Harmonics and Waveform
- Analysis of Total Harmonic Distortion (THD)
- Graphic Phase diagram with 3-Phase system parameters
- 3-phase Voltage or Current Unbalanced Ratio (VUR, AUR) and unbalanced factor
- Capture Transient events (including dip, swell, and outage) with programmable threshold (%)
- Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
- Wide sampling rate range (2 seconds to 2 hours)
- Built-in Clock and Calendar
- Complete with 4 voltage leads with alligator clips, 8 AA batteries, SD card, 100-240V AC adaptor and case. Clamp probes sold separately.
|
< กลับ >
|